Irrigation Accessories

Sort By:

Select products then

Showing products 81 to 109 of 109

Show Products Per Page

<< Prev Page of 2

Filter Products

Grower Supplies Category
Grower Supplies Subcategory 1
Vendor
06PRL12LF
Senninger 12Psi 3/4"Fpt Medium Flow Regulator .1-8Gpm
Vendor: SENNINGER IRRIGATION INC
UM: EA
06PMR12MF
Senninger 12 PSI 3/4" FPT Medium Flow Regulator 2-20 GPM
Vendor: SENNINGER IRRIGATION INC
UM: EA
31-3070
Senninger 1/2" x 3/4" Female Thread Reducer Coupling #CPL32
Vendor: SENNINGER IRRIGATION INC
UM: EA
1/2" FIPT x 3/4" reducing coupler
31-3270
Senninger 1" X 3/4" Female Thread Reducing Coupling CPL43
Vendor: SENNINGER IRRIGATION INC
UM: EA
3/4" FIPT x 1" FIPT reducing coupler
06SPMR20MF
Senninger 20Psi 1"Fpt Medium Flow Regulator 2-20Gpm PMR20MF
Vendor: SENNINGER IRRIGATION INC
UM: EA
30-2225
Senninger 20Psi 3/4"Fpt Low Flow Regulator .1-8Gpm PRL20
Vendor: SENNINGER IRRIGATION INC
UM: EA
30-2240
Senninger 25 PSI 3/4" FPT Low Flow Regulator .1-8 GPM PRL25
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5395
Senninger 3/4" MPT Full/Part Cirle Plastic Impact with #9 Grey
Vendor: SENNINGER IRRIGATION INC
UM: EA
30-2200
Senninger 35Psi 1" Fpt Medium Flow Regulator 2-20Gpm PMR35MF
Vendor: SENNINGER IRRIGATION INC
UM: EA
30-2230
Senninger 35Psi 3/4"Fpt Low Flow Regulator .1-8Gpm PRL35
Vendor: SENNINGER IRRIGATION INC
UM: EA
31-3275
Senninger Black 1" x 1" Female Threaded Coupling #CPL44
Vendor: SENNINGER IRRIGATION INC
UM: EA
1" FIPT x 1" FIPT threaded coupler
33-5370
Senninger Drain Stop Valve 1/2" MPT x 1/2" FPT #DSP2M2F
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5400
Senninger Inverted Mini Wobbler W/#8 Lavender 1/2"MPT
Vendor: SENNINGER IRRIGATION INC
UM: EA
Multi-level throw, approximate angle:0 degrees. Operation pressures: 15 to 40 psi (1.0 to 3.0 bar) Diameter of throw- 30.6'- 37.4' depending on PSI and height above crop. Flow rate of 1.67-2.78 GPM based on PSI. Standard inlet- 1/2" MIPT.
06SIMW6
Senninger Inverted Mini Wobbler with #6 Gold 1/2" MPT
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5457
Senninger Nursery Wire Adapter For Wire Mesh #WMSAA
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5450
Senninger Riser Adapter Assembly 3' x 1/2" FPT .270 Tube with Barb
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5455
Senninger Riser Assembly with Quick Connect For .345 Tubing
Vendor: SENNINGER IRRIGATION INC
UM: EA
06SMW8
Senninger Upright Mini Wobbler White with #8 Lavender 1/2" MPT
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5380
Senninger Upright Mini Wobbler with #4 Light Blue Nozzle 1/2" MPT
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5381
Senninger Upright Mini Wobbler with #7 Lime 1/2" MPT
Vendor: SENNINGER IRRIGATION INC
UM: EA
This unique design provides extremely uniform coverage over a large diameter at low pressures with low evaporative losses. Only one moing part. Constructed entirely of engineering-grade thermoplastics for long-lasting performance. Two year warranty on materials, workmanship and performance. Five year warranty on orifice nozzle wear. Multi-level throw, approximate angle:10 degrees Operation pressures: 15 to 40 psi (1.0 to 3.0 bar) Stream heights range from 1.5 - 3.0 ft above nozzle based on pressure and nozzle size. Diameter of throw 34'-43' depending on pressure and height above crop. Flow rate of 1.30-2.14 GPM based on PSI. Standard inlet: 1/2" NPT male
06SW14
Senninger Wobbler Sprinkler W/#14 Blue 1/2"MPT Std Angle
Vendor: SENNINGER IRRIGATION INC
UM: EA
33-5385
Senninger Wobbler Sprinkler with #9 Grey 3/4" MPT Standard Angle
Vendor: SENNINGER IRRIGATION INC
UM: EA
Multi-level throw, approximately 24o Standard Inlet: 3/4" NPT male Operation pressures: 10 to 35 psi Multi-level throw, approximately 24 degrees Standard Inlet: 3/4" NPT male. Operation pressures: 10 to 35 psi. Diameter of throw 40.5'- 49' depending on PSI and height above crop. Flow rate of 1.85-3.38 GPM based on PSI
33-5495
Senninger Xcel Wobbler High Angle Sprinkler with #9 Grey 3/4"
Vendor: SENNINGER IRRIGATION INC
UM: EA
Multi-level throw, approximately 24o Standard Inlet: 3/4" NPT male Operation pressures: 10 to 35 psi Multi-level throw, approximately 24 degrees Standard Inlet: 3/4" NPT male. Operation pressures: 10 to 35 psi. Diameter of throw 40.5'- 49' depending on PSI and height above crop. Flow rate of 1.85-3.38 GPM based on PSI
33-3278
SMC 1/4 Turn Repair Kit For SO-75, V-75, & V-58 Shut-Offs
Vendor: SPECIALTY MFG CO
UM: EA
33-3275
SMC SO-75 1/4 Turn Brass Shut- Off Mht X Fht #0801290
Vendor: SPECIALTY MFG CO
UM: EA
3/4" Male hose thread x 3/4" female hose thread
33-3276
SMC V-58 1/4 Turn Brass Shut-Off Fpt X Mht #0801790
Vendor: SPECIALTY MFG CO
UM: EA
3/4" female pipe thread x 3/4" male hose thread.
33-3277
SMC V-75 1/4 Turn Brass Shut-Off Fpt X Fpt #0801490
Vendor: SPECIALTY MFG CO
UM: EA
3/4" female hose thread x 3/4" female hose thread.
30-2581
US Plastics N-3 Adapter 3/4"Mpt x 3/4"Mpt #63183
Vendor: UNITED STATES PLASTICS
UM: EA
33-5625
Wonder Waterer {Complete With Inline Filter}
Vendor: WALDO & ASSOCIATES INC
UM: EA

<< Prev Page of 2