Drip Irrigation
Delay Option Filtering
Filter Products
barbed fitting x thread for .125/.197 spaghetti tubing.
3/4" FIPT x 1" FIPT reducing coupler
A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easyjust place the pot under the mark on the dripline - saving up to 20% in installation labor costs. Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet. With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh
This very versatile system uses the pressure compensating dripper and 4-way manifolds with the arrow dripper stakes. The 4-way manifolds can be stacked to allow for the watering of 4 or 8 pots from one emitter. The system enables the grower to water 8 smaller pots by stacking two 4-way manifolds together and then changing over to 4 larger pots by removing one of the 4-way manifolds. The system also allows the grower to vary the tube lengths from crop to crop. Assembly includes a 4-WAY manifold, Flex PVC Hose at desired lengths, and 4 arrow drippers. Please remember to order a 2 GPH Pressure Compensating Dripper with each 4-way assembly. Pot flow rate will vary depending on # of pots being watered from each emitter. A 35 psi regulator required for proper operation.
3/4" female hose thread swivel x 16mm compression fitting
intallation punch for Netafim drippers
All the features of the Woodpecker pressure compensating dripper with the added benefit of a "no-leak" device which turns the flow off when the line pressure drops. All the drippers come on and turn off at the same time, leaving the main water line full and ensuring extremely accurate watering from pot to pot. Nominal flow rate- .5GPH. 35 psi Regulator Required For Proper Operation