flexible polyethylene pipe- black

flexible polyethylene pipe- black

A fast and easy way to keep your fertilizer or chemicals in solution. Do Not Use With Agribrom

flexible polyethylene pipe- black

3/4" insert x 3/4' insert x 3/4" insert x 3/4" insert cross

Arkal Discs are flat, grooved plastic rings with a hole in the center. Rings are stacked together to form a cylindrical filter element. The grooves in the rings criss-cross, forming a network that traps both organic and inorganic contaminants, and allows filtered water to pass through. For easy cleaning remove the cover exposing the discs. They automatically separate allowing access to the accumulation of dirt particles. Wash off the discs with a stream of water, reassemble and the cleaning process is complete. A filter should be used with all Netafim watering systems.

4 way nozzle assembly, used for fogging/humidifing. Also order #5016013 Leak prevention device with each assembly to prevent drips.

11" non-releasable nylon cable ties U.V. treated Use with drip irrigation to attach pipe

1" FIPT x 1" FIPT threaded coupler

Multi-level throw, approximate angle:0 degrees. Operation pressures: 15 to 40 psi (1.0 to 3.0 bar) Diameter of throw- 30.6'- 37.4' depending on PSI and height above crop. Flow rate of 1.67-2.78 GPM based on PSI. Standard inlet- 1/2" MIPT.

This unique design provides extremely uniform coverage over a large diameter at low pressures with low evaporative losses. Only one moing part. Constructed entirely of engineering-grade thermoplastics for long-lasting performance. Two year warranty on materials, workmanship and performance. Five year warranty on orifice nozzle wear. Multi-level throw, approximate angle:10 degrees Operation pressures: 15 to 40 psi (1.0 to 3.0 bar) Stream heights range from 1.5 - 3.0 ft above nozzle based on pressure and nozzle size. Diameter of throw 34'-43' depending on pressure and height above crop. Flow rate of 1.30-2.14 GPM based on PSI. Standard inlet: 1/2" NPT male

3/4" female pipe thread x 3/4" male hose thread.

Space-It Dripline
A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easy-just place the pot under the mark on the dripline - saving up to 20% in installation labor costs.
Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet.
With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh

Netafim's Flexible Dripper Spacing
Choose the dripper spacing according to your needs and maximize your growing area.

Space-It Dripline
A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easy-just place the pot under the mark on the dripline - saving up to 20% in installation labor costs.
Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet.
With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh

Netafim's Flexible Dripper Spacing
Choose the dripper spacing according to your needs and maximize your growing area.

A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easyjust place the pot under the mark on the dripline - saving up to 20% in installation labor costs. Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet. With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh

Space-It Dripline
A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easy-just place the pot under the mark on the dripline - saving up to 20% in installation labor costs.
Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet.
With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh

Netafim's Flexible Dripper Spacing
Choose the dripper spacing according to your needs and maximize your growing area.

used in assembly of 4-way emitters.

Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industrys longest, requiring fewer fittings and less time changing reels during installation