Drip Irrigation Supplies
Delay Option Filtering
Filter Products
Netafim Polyethylene Tubing is made from quality low density polyethylene resins. With Netafim's stringent quality controls, every coil undergoes a battery of tests and over 30 quality checks before leaving the factory. This means you'll receive the highest quality product with each and every coil. Whether you choose white or black Netafim polyethylene tubing, you'll be getting the same performance features you've come to rely on and trust.
UV WhiteT Polyethylene (PE) Tubing
With excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. It withstands heat, direct sun and harsh chemicals while producing cooler water temperatures enhancing plant growth. This white PE tubing compliments our complete line of distinctive white components and tubing.
UV WhiteT Polyethylene (PE) Tubing
With excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. It withstands heat, direct sun and harsh chemicals while producing cooler water temperatures enhancing plant growth. This white PE tubing compliments our complete line of distinctive white components and tubing.
To be used with all dripper assemblies
shut-off cap for WPS drippers
A fast and easy means for closing off the end of your 20mm irrigation line. Can be quickly opened for draining.
To be used with all dripper assemblies
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 35 PSI should be used with pressure compensated drippers, or mini-sprinklers. Low flow- .25 - 4.4 GPM
"clips" onto the dripper tubing for stabilization.
3/4" MIPT x 16mm compression adapter
These are hiqh quality, economical emitters for use on short, level runs. With non-pressure compensating emitters, it is necessary to install a 20 PSI pressure regulator to reduce the pressure on the line. Nominal flow rate available: 0.5 GPH.
Linear Low Density Polyethylene Tubing should always be used with Netafim Irrigation Systems
Prepunched UV WhiteT PE Tubing (.520" x .620")
Fully UV resistant and completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. Netafim's UV White PE Tubing produces cooler water temperatures and enhances plant growth.
Fully UV resistant and completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. Netafim's UV White PE Tubing produces cooler water temperatures and enhances plant growth.
A labor-saving drip system for watering potted plants. Space-It is thinwall dripline with pre-spaced drippers designed to be placed directly over the top of pots with the location of each dripper visibly marked on the tubing. Positioning of pots (plants) is quick and easyjust place the pot under the mark on the dripline - saving up to 20% in installation labor costs. Injection molded drippers welded into a wall of seamless tubing means the flow path is not subject to distortion during installation and the clear outlet hole allows water to exit right at the outlet. With flexible dripper spacings, Space-It allows you to choose the spacing that matches your pot spacing to fit your needs.
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh
Specifications:
*Wall thickness: 8 mm
*Inside diameter: .636"
*Nominal flow rates: .24 GPH and .38 GPH @ 10 PSI
*Common spacings: 12", 18" and 24"
*Other special spacing available by special order
*Recommended filtration: 120 mesh
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensating drippers- Low flow .25- 4.4 GPM
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
barbed fitting x thread for .125/.197 spaghetti tubing.
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
This very versatile system uses the pressure compensating dripper and 4-way manifolds with the arrow dripper stakes. The 4-way manifolds can be stacked to allow for the watering of 4 or 8 pots from one emitter. The system enables the grower to water 8 smaller pots by stacking two 4-way manifolds together and then changing over to 4 larger pots by removing one of the 4-way manifolds. The system also allows the grower to vary the tube lengths from crop to crop. Assembly includes a 4-WAY manifold, Flex PVC Hose at desired lengths, and 4 arrow drippers. Please remember to order a 2 GPH Pressure Compensating Dripper with each 4-way assembly. Pot flow rate will vary depending on # of pots being watered from each emitter. A 35 psi regulator required for proper operation.
Improved Control of Water and Fertilizer
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
*Pressure Compensation (PC) assures the last container in the row gets the same amount of water as the first
*Prevents over watering. The check valve prevents water in the supply pipes from draining into the lowest plants after the valve shuts off
Efficient Operation
Netafim solutions for nursery containers are designed to wet the soil surface evenly to maximize water retention by the soil mix and evenly release liquid or timed-release fertilizers.
Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Delivers precise amounts of water to individual pots. The WPCJ pressure compensated no-leak dripper is ideal for longer runs, when irrigating on slope, or when absolute precision of water volume to each pot is required. The WPCJ's "no-leak" feature stops dripping when the pressure on the main water line drops. All of the drippers on the line start and stop at the same time, leaving the line full of water for the next irrigation. .5 GPH flow rate, a 20 PSI pressure regulator is required for proper operation. Choose either the red plastic weight or the angle barbed stake to complete the installation. Perfect for hanging baskets, nursery crops, potted plants.
The Multi-Outlet Dripper (M.O.D.) provides you with the flexibility to design your system your way. One M.O.D. does the job of eight drippers, and can be set up in a variety of configurations to meet your specific needs. Considerable cost savings are realized in the reduction of drippers, main pipes and accessories. Installation time is also greatly reduced, adding to your savings. The unique turbulent flow pattern and wide water passages provide a high degree of uniformity and prevent clogging. The M.O.D. exhibits all the reliabilty, precision and efficiency that has made Netafim the industry leader.
Streamline Plus Thinwall Dripline is the perfect choice for row crop growers planting short to medium sized runs. Available with variable dripper spacings, allowing growers to customize systems based on their application rates and wetting patterns and numerous wall thicknesses that can weather various environmental conditions. For surface or subsurface installations in practically any soil type.
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Product Advantages:
*Seamless construction is stronger and more durable than comparable drip tape
*Fortifies against splitting or bursting under high pressures required for proper flushing
*Flap outlet protection impedes soil ingestion and root intrusion
*Low filtration requirement - 120 mesh
*Driplines packaged with more feet per reel, the industryÂ’s longest, requiring fewer fittings and less time changing reels during installation
Maintains a constant 15 PSI for low pressure installations- Low flow- .25- 4.4 GPM
Arkal Discs are flat, grooved plastic rings with a hole in the center. Rings are stacked together to form a cylindrical filter element. The grooves in the rings criss-cross, forming a network that traps both organic and inorganic contaminants, and allows filtered water to pass through. For easy cleaning remove the cover exposing the discs. They automatically separate allowing access to the accumulation of dirt particles. Wash off the discs with a stream of water, reassemble and the cleaning process is complete. A filter should be used with all Netafim watering systems.
STAINLESS STEEL FILTER ELEMENT
3/4" Female hose thread swivel x 16mm compression x 16 mm compression tee
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 20 PSI should be used with non-pressure compensated drippers. Med flow 3.5-17 GPM
Adapter to fit spinner/spreader mini-sprinklers to hanging assemblies, or LPD's
Pressure regulators are devices that reduce the pressure of the watering system to a specific psi in order to optimize the performance of the sprinklers or drippers in use. 35 PSI should be used with pressure compensated drippers, or mini-sprinklers. Flow range 7-35 GPM
Start screw nut connector for PE, fast body w/o ring #32500-018510
A quick and easy means for closing off the end of your 1" irrigation line. Can be quickly re-opened for draining.